Feed on
Posts
Comments

Tag Archive 'Spindle Moulder'

You asked for it… You got it!

Over the past week or so, several of you have reached out asking, speculating, wondering what it’s like to operate the Sagar Spindle Moulder with the box joint attachment. I always try to give the people what they want, so here goes: I moved the machine from the garage over to the shop this past […]

Read Full Post »

Somebody stop me! Please!

Lately, I’ve been buying shapers like it’s nobody’s business (meaning I have no business owning this many shapers)  A few weeks ago, I received this little gem from the United Kingdom: It’s a very sweet little Sagar shaper with a Wadkin rolling table attachment and a very large set of box joint cutters on it. […]

Read Full Post »

JAFSP (Just another shaper post)

  On a recent trip to England, this little spindle moulder caught my eye: I had been looking for a cheap shaper I could steal the fence from. I have a few European machines that are missing the split style fences that mount into the dovetailed slots on the table. As an example, this Pierre […]

Read Full Post »

Whitney Fence Part 2

So this is what I’ve been able to accomplish so far: Flattened base and two sides using a large shell mill: Drill the mounting holes and define layout for the fence support bar bores: Drill the first holes using a 1/2″ x 8″ bit: Open the holes to a larger size with stepped drills: Open […]

Read Full Post »

I recently acquired a new shaper (and a quest machine). It’s a Baxter Whitney No. 89. This is the largest of the single spindle Whitney shapers. These machines have huge tables and are bullet proof. I already own one No. 89, but this one is… well… special… What’s really unique about this machine is the overhead […]

Read Full Post »

Pierre Benite Shaper

I found this shaper through a craigslist advert in Belaire, Texas last summer. I purchased the machine sight-unseen as part of a package deal with a Wadkin PK sliding table saw. I had both machines shipped via common carrier from Texas to New Jersey. The total freight bill for both machines was $402 (inclusive of insurance). I […]

Read Full Post »

What’s wrong with this picture?

I found this Wadkin EP shaper on e-bay this morning. Interestingly, the table appears to have been rotated 90 degrees counter clockwise. This basically moves the operator position to the right side of the shaper. I’m trying to figure out why you’d do this. The shaper on the left is the machine in question. The […]

Read Full Post »